Supervisory Control and Data Aquisition (SCADA) Systems

Stand-alone SCADA Systems

More than fifty years of control and data acquisition system design on our own heat treatment equipment has led to the development of an advanced stand-alone supervisory control and data acquisition system.

CAN-ENG’s SCADA system, Level II Automation is not only available on new equipment but can be used to upgrade and enhance existing manufacturing processes going well beyond just furnace processes to include other equipment in order to meet the most stringent and advanced intelligent information software needs.

Request for SCADA System Quote

Mesh Belt SCADA Image
Industrial Furnace Systems
/Portals/0/EasyDNNRotator/669/News/aid28282004-Alcan-Modular-batch-Furnace.jpg
Modular Aluminum Heat Treatment Systems

Modular Aluminum Heat Treatment Systems

Modular Aluminum Heat Treatment Systems

Modular Aluminum Heat Treatment Systems

CAN-ENG Furnaces’ engineers routinely develop cost effective Modular Aluminum Heat Treatment Systems which are ideally suited for new start-up manufacturing or pilot-processing products.

/Portals/0/EasyDNNRotator/669/News/aid3636Hero-Roller-Hearth-Furnace-Hero.jpg
General Roller Hearth Furnace Systems

General Roller Hearth Furnace Systems

General Roller Hearth Furnace Systems

General Roller Hearth Furnace Systems

CAN-ENG Roller Hearth Furnaces are workhorses for heat treating a great variety of materials. CAN-ENG Roller Hearth furnaces are capable at operating up to 1150°C (2100°F) for alloy roll designs and 1260°C (2300°F) for Ceramic Roll Designs.

/Portals/0/EasyDNNRotator/669/News/aid7171Can-Eng-Furnaces-Line-Addition.jpg
Can-Eng Furnaces Finalizes Commissioning Furnace Line Addition

Can-Eng Furnaces Finalizes Commissioning...

Can-Eng Furnaces Finalizes Commissioning Furnace Line Addition

Can-Eng Furnaces Finalizes Commissioning Furnace Line Addition

/Portals/0/EasyDNNRotator/669/News/aid3030Chain-Conveyor-Hero.jpg
Chain Conveyor Furnace Systems

Chain Conveyor Furnace Systems

Chain Conveyor Furnace Systems

Chain Conveyor Furnace Systems

CAN-ENG's Chain Conveyor Furnace Systems are ideal for conveying heavy loads with high loading densities, such as tubes, bars, leaf and coil springs, forgings castings, lift truck forks and suspension components.

/Portals/0/EasyDNNRotator/669/News/aid3232Hero-Roller-Hearth-bar-Quench-and-Temper-2.jpg
Bar Roller Hearth Furnace Systems

Bar Roller Hearth Furnace Systems

Bar Roller Hearth Furnace Systems

Bar Roller Hearth Furnace Systems

CAN-ENG Roller Hearth Furnace Systems for bar and long product have fully integrated hardening, quenching and tempering for high volume and continuous production up to 836 metric tons/hr (80,000 lbs/hr).

/Portals/0/EasyDNNRotator/669/News/aid3434Hero-Bar-Tunnel-Furnace-Systems.jpg
Bar Tunnel Furnace Systems

Bar Tunnel Furnace Systems

Bar Tunnel Furnace Systems

Bar Tunnel Furnace Systems

CAN-ENG Tunnel Furnace steel bar heat treatment systems have fully integrated hardening, quenching and tempering for high volume and continuous production up to 9 metric tons/hr (20,000 lbs/hr).

/Portals/0/EasyDNNRotator/669/News/aid3535Hero-Walking-beam.JPG
Bar Walking Beam and Walking Hearth Furnace Systems

Bar Walking Beam and Walking Hearth...

Bar Walking Beam and Walking Hearth Furnace Systems

Bar Walking Beam and Walking Hearth Furnace Systems

CAN-ENG Roller Walking Beam/Walking Hearth Furnace systems have fully integrated hardening, quenching and tempering for high volume and continuous production up to 65 metric tons/hr (140,000 lbs/hr).

/Portals/0/EasyDNNRotator/669/News/aid4949Ontario-Export-Award-winners-2015.jpg
CAN-ENG Furnaces International Limited Wins Prestigious Ontario Export Award

CAN-ENG Furnaces International Limited...

CAN-ENG Furnaces International Limited Wins Prestigious Ontario Export Award

CAN-ENG Furnaces International Limited Wins Prestigious Ontario Export Award

Winners of the 2015 Ontario Export Awards were announced at a gala luncheon at the International Centre in Mississauga, Ontario on November 24th.  More than 200 manufacturing executives and representatives from trade, government and industry attended the event.

/Portals/0/EasyDNNRotator/669/News/aid4242Hero-Tube-Q-T-.jpg
Tube Quench and Temper Furnace Systems

Tube Quench and Temper Furnace Systems

Tube Quench and Temper Furnace Systems

Tube Quench and Temper Furnace Systems

CAN-ENG Tube Quench and Temper furnaces lines can be configured as either Walking Beams or Pushing Chain Conveyors and are integrated with in-line water spray quenching for production capacities up to 90 metric tons/hr (200,000 lbs/hr).

/Portals/0/EasyDNNRotator/669/News/aid3939CMC-Pics-041.jpg
Roller Hearth Plate Normalizing Furnace Systems

Roller Hearth Plate Normalizing Furnace...

Roller Hearth Plate Normalizing Furnace Systems

Roller Hearth Plate Normalizing Furnace Systems

CAN-ENG Roller Hearth Furnaces for plate normalize applications utilize a design methodology to minimize roll pick-up and produce the highest quality plates with very tight temperature uniformity.

/Portals/0/EasyDNNRotator/669/News/aid3737Hero-Walking-Beam-Hero.jpg
General Walking Beam and Walking Hearth Furnace Systems

General Walking Beam and Walking Hearth...

General Walking Beam and Walking Hearth Furnace Systems

General Walking Beam and Walking Hearth Furnace Systems

CAN-ENG Roller Walking Beam/Walking Hearth Furnace systems are capable of processing both symmetrical and non-symmetrical parts at a capacity up to 65 metric tons/hr (140,000 lbs/hr ).

/Portals/0/EasyDNNRotator/669/News/aid5151CAN-ENG-Continuous-Mesh-Belt-Atmosphere-Furnace-System-Overall.JPG
CAN-ENG Furnaces International Limited Receives Four Contracts to Build 6000 lb/hr Continuous Mesh Belt Atmosphere Furnace Systems

CAN-ENG Furnaces International Limited...

CAN-ENG Furnaces International Limited Receives Four Contracts to Build 6000 lb/hr Continuous Mesh Belt Atmosphere Furnace Systems

CAN-ENG Furnaces International Limited Receives Four Contracts to Build 6000 lb/hr Continuous Mesh Belt Atmosphere Furnace Systems

Commercial and Captive Heat-Treaters have come to rely on CAN-ENG technology for the processing of safety critical automotive fasteners and small components.

/Portals/0/EasyDNNRotator/669/News/aid4343Batch-IQ-Hero.jpg
Batch Integral Quench Furnace Systems

Batch Integral Quench Furnace Systems

Batch Integral Quench Furnace Systems

Batch Integral Quench Furnace Systems

Standard size capabilities up to 5000 lb (2,200 kg) loads with a full range of companion equipment to compliment each system including: batch temper furnaces, batch washer units, atmosphere generators, charge cars, load tables, air cool stations and complete automation with SCADA capabilities.

/Portals/0/EasyDNNRotator/669/News/aid57572016-05-12-CAN-ENG-Furnaces-T7-Furnace-Line-for-Thin-Walled-High-Pressure-Die-Cast-Aluminum-Automotive-Components.jpg
CAN-ENG Furnaces International Limited Successfully Installs and Commissions a T7 Automated Furnace Line

CAN-ENG Furnaces International Limited...

CAN-ENG Furnaces International Limited Successfully Installs and Commissions a T7 Automated Furnace Line

CAN-ENG Furnaces International Limited Successfully Installs and Commissions a T7 Automated Furnace Line

CAN-ENG Furnaces International Limited has successfully installed and commissioned a T7 automated furnace line for the production of thin walled high pressure die cast (HPDC) aluminum automotive structural components.

/Portals/0/EasyDNNRotator/669/News/aid4747Hero-Ferrous-Spin-Quench-Image.jpg
Quenching and Descale Technologies

Quenching and Descale Technologies

Quenching and Descale Technologies

Quenching and Descale Technologies

Can-Eng is a recognized leader in quenching and descale technology offering custom designed solutions for demanding applications.
/Portals/0/EasyDNNRotator/669/News/aid62CAN-ENG---Rotary-Hearth-Furnace-for-Forgings.jpg
CAN-ENG Furnaces International Limited Contracted to Design and Manufacture a Titanium Rotary Forging Furnace for Weber Metals, Inc.

CAN-ENG Furnaces International Limited...

CAN-ENG Furnaces International Limited Contracted to Design and Manufacture a Titanium Rotary Forging Furnace for Weber Metals, Inc.

CAN-ENG Furnaces International Limited Contracted to Design and Manufacture a Titanium Rotary Forging Furnace for Weber Metals, Inc.

/Portals/0/EasyDNNRotator/669/News/aid702017-08-03-Automotive-Corporation's-Bearing-Division-Bolsters-Production.JPG
Automotive Corporation’s Bearing Division Bolsters Production

Automotive Corporation’s Bearing...

Automotive Corporation’s Bearing Division Bolsters Production

Automotive Corporation’s Bearing Division Bolsters Production

A global automotive corporation’s American based bearing division placed an order with Can-Eng Furnaces International for a mesh belt furnace system for heat treating thrust races, retainer/cages, and washers.

/Portals/0/EasyDNNRotator/669/News/aid66Light-Weighting-Automotive-Suspension-Component-Manufacturer-Expands-Production.jpg
Light Weighting Automotive Suspension Component Manufacturer Expands Production

Light Weighting Automotive Suspension...

Light Weighting Automotive Suspension Component Manufacturer Expands Production

Light Weighting Automotive Suspension Component Manufacturer Expands Production

Can-Eng Furnaces International Limited was recently awarded a contract from a leading North American manufacturer of forged aluminum suspension components. This project reflects a long list of recent projects involving Automotive Light Weighting initiates where Can-Eng technologies have been favored in delivering the lowest cost of ownership per unit of production.

/Portals/0/EasyDNNRotator/669/News/aid65_DSC7981---edit.jpg
Aerospace Supplier Orders Titanium Rotary Hearth Forging Furnace

Aerospace Supplier Orders Titanium...

Aerospace Supplier Orders Titanium Rotary Hearth Forging Furnace

Aerospace Supplier Orders Titanium Rotary Hearth Forging Furnace

Can-Eng Furnaces International Limited was contracted to commission a turnkey 36 ft. diameter “Pancake” style rotary hearth furnace for a leading North American Based aerospace supplier.

/Portals/0/EasyDNNRotator/669/News/aid4141Secondary-Bresmex.jpg
Tube and Bar Annealing Furnace Systems

Tube and Bar Annealing Furnace Systems

Tube and Bar Annealing Furnace Systems

Tube and Bar Annealing Furnace Systems

CAN-ENG Roller Hearth Tube/Bar Annealing systems allow for high volume continuous annealing of steel bars or tubes under a wide variety of atmospheres: Open, N2, EXO gas, ENDO gas, N2/methanol, and 100% H2.

Level II Automation System Capabilities

  • Supervisory control of equipment, machinery and processes
  • Integrated system diagnostics
  • Advanced data acquisition and part tracking features
  • Flexible part recipe control for batch and continuous applications
  • Real-time and historical data collection, storage and retrieval
  • Automated System Diagnostics, Alarm datalogging and maintenance notification
  • Scheduling optimization and customized reporting tools
  • Real-time & Historical Data Collection & Integrated Results Reporting
  • Part tracking through easy to understand animations of work in progress
  • Integration with existing MRP systems for advanced product scheduling



We're Here To Help!

Here are several ways to contact us

 


Request For Quote

Our strength is the ability to custom engineer a furnace for any customer requirement.

Submit Request

Call Or Email

Our team is dedicated to providing the highest quality of customer service and support.

Contact Us

Visit Us

Before we build a furnace we build a partnership with each and every customer.

Location Map