Heat Treatment Systems for Steel

CAN-ENG Tube Quench and Temper furnaces lines can be configured as either Walking Beams or Pushing Chain Conveyors and are integrated with in-line water spray quenching for production capacities up to 90 metric tons/hr (200,000 lbs/hr).

CAN-ENG’s Car Bottom Furnaces are ideal for a variety of thermal treatments including stress relieving, annealing, heating for hot work, austenitizing and normalizing.

CAN-ENG Rotary Hearth Furnaces have been utilized in a wide variety of applications for both Reheating and Heat Treating operations. System capacity ranges up to 60 metric tons/hr (130,000 lbs/hr) tph and consist of both rotary table and rotary ring designs.

CAN-ENG Roller Hearth Furnace Systems for bar and long product have fully integrated hardening, quenching and tempering for high volume and continuous production up to 836 metric tons/hr (80,000 lbs/hr).

CAN-ENG Roller Hearth Furnaces for plate quench and temper applications utilize a design methodology to minimize roll pick-up and produce the highest quality plates with very tight temperature uniformity.

CAN-ENG Tunnel Furnace steel bar heat treatment systems have fully integrated hardening, quenching and tempering for high volume and continuous production up to 9 metric tons/hr (20,000 lbs/hr).

CAN-ENG's Chain Conveyor Furnace Systems are ideal for conveying heavy loads with high loading densities, such as tubes, bars, leaf and coil springs, forgings castings, lift truck forks and suspension components.

CAN-ENG Roller Walking Beam/Walking Hearth Furnace systems are capable of processing both symmetrical and non-symmetrical parts at a capacity up to 65 metric tons/hr (140,000 lbs/hr ).

CAN-ENG Roller Hearth Tube/Bar Annealing systems allow for high volume continuous annealing of steel bars or tubes under a wide variety of atmospheres: Open, N2, EXO gas, ENDO gas, N2/methanol, and N2/H2.

CAN-ENG Roller Hearth Furnaces are workhorses for heat treating a great variety of materials. CAN-ENG Roller Hearth furnaces are capable at operating up to 1150°C (2100°F) for alloy roll designs and 1260°C (2300°F) for Ceramic Roll Designs.

CAN-ENG Roller Walking Beam/Walking Hearth Furnace systems have fully integrated hardening, quenching and tempering for high volume and continuous production up to 65 metric tons/hr (140,000 lbs/hr).

CAN-ENG Roller Hearth Furnaces for plate normalize applications utilize a design methodology to minimize roll pick-up and produce the highest quality plates with very tight temperature uniformity.