Heat Treatment Solutions for Commercial Heat Treaters

CAN-ENG Roller Hearth Furnaces for plate quench and temper applications utilize a design methodology to minimize roll pick-up and produce the highest quality plates with very tight temperature uniformity.

CAN-ENG's primary aluminum ovens and furnaces provide practical, cost effective solutions to demanding processing challenges.

CAN-ENG Roller Hearth Tube/Bar Annealing systems allow for high volume continuous annealing of steel bars or tubes under a wide variety of atmospheres: Open, N2, EXO gas, ENDO gas, N2/methanol, and N2/H2.

CAN-ENG Tube Quench and Temper furnaces lines can be configured as either Walking Beams or Pushing Chain Conveyors and are integrated with in-line water spray quenching for production capacities up to 90 metric tons/hr (200,000 lbs/hr).

CAN-ENG Rotary Hearth Furnaces have been utilized in a wide variety of applications for both Reheating and Heat Treating operations. System capacity ranges up to 60 metric tons/hr (130,000 lbs/hr) tph and consist of both rotary table and rotary ring designs.

CAN-ENG’s Car Bottom Furnaces are ideal for a variety of thermal treatments including stress relieving, annealing, heating for hot work, austenitizing and normalizing.

Standard size capabilities up to 5000 lb (2,200 kg) loads with a full range of companion equipment to compliment each system including: batch temper furnaces, batch washer units, atmosphere generators, charge cars, load tables, air cool stations and complete automation with SCADA capabilities.

CAN-ENG Roller Walking Beam/Walking Hearth Furnace systems have fully integrated hardening, quenching and tempering for high volume and continuous production up to 65 metric tons/hr (140,000 lbs/hr).

CAN-ENG Tunnel Furnace steel bar heat treatment systems have fully integrated hardening, quenching and tempering for high volume and continuous production up to 9 metric tons/hr (20,000 lbs/hr).

T4, T5, T6 T7, homogenizing and annealing systems for automotive, fastener and structural component manufacturers.

CAN-ENG Roller Hearth Furnace Systems for bar and long product have fully integrated hardening, quenching and tempering for high volume and continuous production up to 836 metric tons/hr (80,000 lbs/hr).

CAN-ENG Roller Walking Beam/Walking Hearth Furnace systems are capable of processing both symmetrical and non-symmetrical parts at a capacity up to 65 metric tons/hr (140,000 lbs/hr ).

CAN-ENG Roller Hearth Furnaces for plate normalize applications utilize a design methodology to minimize roll pick-up and produce the highest quality plates with very tight temperature uniformity.

CAN-ENG Roller Hearth Furnaces are workhorses for heat treating a great variety of materials. CAN-ENG Roller Hearth furnaces are capable at operating up to 1150°C (2100°F) for alloy roll designs and 1260°C (2300°F) for Ceramic Roll Designs.

CAN-ENG’s BHTS® eliminates the need for product conveying baskets, carriers, trays or fixtures which require continuous repairs and replacement, reducing capital costs and greatly reducing energy consumption requirements.

CAN-ENG's Chain Conveyor Furnace Systems are ideal for conveying heavy loads with high loading densities, such as tubes, bars, leaf and coil springs, forgings castings, lift truck forks and suspension components.